The DSX Tuning flex fuel kit is the original plug and play solution to adding flex fuel on Gen IV/Gen V GM V8 vehicles. Use these kits to add the ability to run anywhere from straight gasoline to straight ethanol as well as reveal the true power potential of your setup. Forced induction scenarios especially benefit from the use of ethanol, and these allow you to seamlessly switch between gasoline and ethanol without having to monitor your fuel content or reflash your tune.
This kit uses:
- Genuine GM Flex Fuel sensor
- Plumbing kit made of corrosion resistant materials to ease installation
- Plug and Play wiring harness made with OEM connectors and terminals crimped with OEM tooling
- DSX Tuning 3D printed fuel line disconnect
PLEASE NOTE: It is possible to install this kit without tuning, but you will not gain the ability to switch fuels until the functionality is activated in the ECM through
HP Tuners or
EFILive.
COMPATIBILITY NOTE: If you have a 2005 C6 Corvette, You will need to change the option above on the options tab. The 2005 C6 ECU varies from the 2006-2013 C6 Corvette.
You may need to reattach side skirts using OEM rivets (ZR1 style). We recommend at least five.
DSX manufactured components are covered against defects in materials and workmanship for the life of the product.
